All American RO Systems Support

The CMF filter must be placed between the faucet and the post filter on the RO Unit. The blue tubing line installed in the faucet will need to be cut such that the CMF filter is between the two and the tubing is not put in a bind. A bracket is provided to mount the CMF filter in the desired location.

Begin by using the provided tube snips to cut the blue line. Once the line is cut, attach the faucet line to the CMF filter. Ensure it is attached to the side of the filter where water will be exiting as indicated by the flow direction on the label. Attach the reminder of the blue line to the open port on the CMF filter. Leave the other end of the tube unconnected for now. It will be connected later in the installation.