Skip to Content
Matrixx Infusion Support
System Start Up
1
With the bypass handle in the bypass position, initiate an immediate regeneration
This will advance the valve to the backwash position.
2
Once the valve has stopped moving and is in the backwash position, slowly open the bypass handle about 1/8th turn
Water should slowly enter the tank.
NOTE: If there is a loud knocking sound, simply turn the bypass handle back slightly as the system is filling too quickly.
3
During the backwash cycle, slowly open the bypass valve until there is water coming out of the drain hose
Then open the bypass valve fully. During this process, peroxide should be injecting into the system.
4
Allow the system to backwash and push all the air out through the drain
5
Allow the unit to rinse for the entire cycle
The water in the drain should be running clear by the end of the Rapid Rinse Cycle.
6
The valve will then advance to Service
7