Skip to Content
Matrixx Infusion Support
System Regeneration
Normal Operation
Home Display - The home display will alternate between the time of day and gallons left until the next regeneration. The meter will count down to zero (0000) and then regenerate at the scheduled time set.
Starting a Regeneration Cycle
To Start Delayed Extra Cycle
If Days Remaining Until Next Regeneration does not read '0000', press and hold the Set/Change button for 3 seconds until the display reads '0000'
Regeneration cycle will initiate at the next designated regeneration time.
To start Immediate Extra Cycle, first complete above step.
With Gallons Remaining Until Next Regeneration at '0000', press and hold the Set/Change button.
After 3 seconds, the regeneration cycle will begin.
To Fast Cycle thru regeneration, first complete above 2 steps.
Press and hold the Set/Change button for 3 seconds to advance to the next cycle step. Fast Cycle is not necessary unless desired to manually step through each cycle step. (Repeat until valve returns to home display)