Skip to Content
Matrixx Infusion Support
Programming Using Onboard Buttons
1
To enter the Main Menu, press the Menu/Enter button
(Time of Day will flash)
2
To set the Time of Day, press the Set/Change button
(First digit will flash)
To change digit value, press the Set/Change button.
To accept the digit value, press the Menu/Enter button.
Next digit will flash to begin setting.
Once the last digit display is accepted, all digits will flash.
3
To set A.M. or P.M., press the Menu/Enter button
To change digit value, press the Set/Change button.
To accept the digit value, press the Menu/Enter button.
Once A.M. or P.M. is accepted, the next menu item will flash.
4
To set the number of days between backwash cycles (A), press the Set/Change button
To change digit value, press the Set/Change button.
To accept the digit value, press the Menu/Enter button.
Maximum value is 29
If value is set to 0, automatic backwash will never occur
Default setting is 3 days for filters
5
To Exit Main Menu, press the Menu/Enter button
NOTE: If no buttons are pressed for 60 seconds, the Main Menu will be exited automatically.
6
To Enter Master Programming Mode Hold both buttons for 3-5 seconds (Menu/Enter).
7
R 1A will be flashing.
This is the regeneration time. Push the set/change button to make changes. Use the menu button to scroll from digit to digit. The digit to be changed will be the only one flashing. Once all digits have been changed push the menu button until all the digits are flashing. When all digits are flashing push the menu button again to go to the next parameter.
8
1 10 will be flashing.
This is the backwash time. Push the set/change button to make changes. Use the menu button to scroll from digit to digit. The digit to be changed will be the only one flashing. Once all digits have been changed push the menu button until all the digits are flashing. When all digits are flashing push the menu button again to go to the next parameter.
9
2 5 will be flashing
This is the rest cycle between backwash and rinse. Set this parameter to 2.
10
3 10 will be flashing.
This is the rinse time. Push the set/change button to make changes. Use the menu button to scroll from digit to digit. The digit to be changed will be the only one flashing. Once all digits have been changed push the menu button until all the digits are flashing. When all digits are flashing push the menu button again to go to the next parameter.
11
do 0 will be flashing
This is "display off"
set to 0 if you want the display to stay on constantly
set to 1 if you want the display to time out
12
bE 1 will be flashing.
This is the Bluetooth ON/OFF switch. bE 1 would indicate it is ON and bE 0 would indicate it is OFF. Push the set/change button to make changes. Use the menu button to scroll from digit to digit. The digit to be changed will be the only one flashing. Once all digits have been changed push the menu button until all the digits are flashing. When all digits are flashing push the menu button again to go to the next parameter.
13
btPP alternating to 1234 will be flashing.
This is the Bluetooth password. It is default at 1234. Push the set/change button to make changes. Use the menu button to scroll from digit to digit. The digit to be changed will be the only one flashing. Once all digits have been changed push the menu button until all the digits are flashing. When all digits are flashing push the menu button again to go to the next parameter.