Skip to Content
Matrixx Infusion Support
Programming Using Legacy View App
The Legacy View app allows the user to control every aspect of the water system from the convenience of a smart phone. The Legacy View app will allow the user to monitor usage history, change cycle times, start a regeneration and advance through a regeneration.
To use the Legacy View Bluetooth App:
1
Go to the App store on the phone to be used and search for "Legacy View"
2
Download the free Legacy View app
3
Open the app to begin programming
4
Once the app is open, it will begin scanning for control valves in the Bluetooth vicinity
5
Once the app finds the control valve or valves, they will appear on the screen
Each valve can be renamed by tapping on the three vertical dots on the valve listed on the screen. Choose "Label Device" and a lettered keyboard will appear. The user can name the valve using the keyboard then save it by pushing "OK".
6
Choose the valve to be programmed by tapping on the name
A "Dashboard" will show up for the control valve.
7
Dashboard
Parameters that can be changed are indicated with orange font. To change a parameter, tap on the orange font then use the keyboard that appears to change the value. 1. Time of Day: Tap on the "Time of Day" box. A box will appear that allows you to set the unit to the time that matches the device being used to program the unit. Press "OK" and the time will change to the current time of the device. 2. Backwash Frequency: Tap on the "Filter Backwash Frequency" box and input the desired days between backwashing. Most applications will set this to 3 days. If iron or sulfur is extreme, it may need to be set to 1 or 2. Please call US Water at 1-800-608-8972 for help with setting the frequency, if necessary. 3. Regeneration Time: Tap on the "Regeneration Time" box. Input the desired regeneration time for normal operation. This is typically two hours after everyone in the house is asleep or the business is closed for the day.
8
Advanced Settings
Parameters that can be changed are indicated with orange font. To change a parameter, tap on the orange font then use the keyboard that appears to change the value. 1. Backwash: This should be set to "10" min and should not be changed. 2. Rest: This should be set to "2" min and should not be changed. 3. Rapid Rinse: This should be set to "10" min and should not be changed.
9
Status and History
The Status and History screen shows current conditions of the system as well as flow rate and usage history. There are two parameters that can be reset. 1. Total Regenerations: This parameter shows how many times the system has regenerated since it was put in service or since the last time the value was reset. 2. Total Water Treated: This parameter shows the total amount of water that has been treated since the system was put in service or since the last time the value was reset. Regenerating Using the Legacy View App There are two options for regenerating the system. Tap on the desired option and press "OK". 1. Regenerate Now: Regenerate Now will queue an immediate regeneration and will start instantly. 2. Regenerate at Next Regen Time: Regenerate at Next Regen Time will queue the system to regenerate at the specified regeneration time chosen in the programming.